Tapering Jig from scrap wood with FREE plans

Recently, I made a tapering jig out of necessity for a project I was working on. Check it out. The jig came out better than expected, so I decided to create plans for it. I didn't spend any money on this specific jig, I already had everything I needed in the shop. My guess is that you, too, have...

DIY Desk and Organization

DIY Desk and Organizationvideo
Introduction Not too long ago I made a table and chair for my kids to use as a place to do arts and crafts as well as a place for my oldest son to do homework. Since then we’ve had another boy start school and soon we’ll have all three in school, so I figured I better make the other...

Kids Activity table

Kids Activity Table with Storage Plan
We needed a place for the kids to keep all of their arts and crafts supplies and off the top of the fridge, off the dinning room table, and even off the floor. With three boys things can get a bit messy and disorganized, so we needed a solution. We made this activity table... Tools used in this project: Table...

Router Fence with Dust Collection

Router Fence with Dust Collectionvideo
ROUTER FENCE WITH DUST COLLECTION Introduction I’ve had my current router fence for some time now and it looks pretty bad and I also made it before I started doing YouTube videos, which means I don’t have a build video to reference. In addition to having a video to refer back to, I also wanted a build video to accompany the...

Bandsaw resaw fence – how to

This bandsaw re-saw fence was very simple to make. It consists of four pieces: three for the base, which is the part that slips onto the factory fence, and one for the front which is the tall section of the fence. Some will say you need a way to account for blade drift, but I tested it by re-sawing a...

Knock Down Stool

Knock Down Stool - Mainvideo
Knock Down Stool GET THE PLANS HERE The Design I’ve had the design for this stool idea for a while now, I’m just now getting around to actually making it. The design itself is simple, but the fact that it has much more potential as other furniture is interesting. One main thing I wanted in this project was to make it functional...

Kids Activity Chair

Kids activity chair
Not too long ago I made an activity table for my kids and I just recently made matching chairs to go along with it. The table and chairs both have storage for just about anything you want to store in them. Take a look... The first thing I did was breakdown the plywood according to the plans (get the...

Drill Charging Station with Air Tool Storage AND Dust Free Bins

After rearranging my shop a little bit, I lost my drill charging station location due to hanging a cabinet in it's place. So, the only logical thing to do was to build a new one. Keep reading for more... My process was a little different throughout this project, whereas I normally start a project with Sketch-up. This time around...

Clamp Rack with Safety Features

Clamp rack with safety features
I've been needing to upgrade my clamp rack for a while now due to safety in the shop. Its out with the old and in with the new... This is one of those shop projects that you'll ask yourself, "Why didn't I do this sooner"? Safety is becoming more of a concern as the kids get older and help out in...

DIY Wood Tool Tote with FREE Plans – Teach Woodworking

My kids are in the shop with me this week and we made a wooden tool tote. We actually made three totes, one for each of my sons. They already had a tool tote that they were out growing, but this project was more about getting them involved. Click Read More... Watch the video here Tools used in...

Outfeed Assembly Table: Part 2 – The Build

This is part two, the build, of the Outfeed/Assembly Table project. Once I got started on this build I didn't want to stop until it was done. The improved workflow and efficiency this table provides was much needed in the shop, but getting there was challenging... This project was looong overdue. I have been needing more storage and organization...